Saturday, March 26, 2005

To "CHIP FRINGE", edge-stitch the desired depth of finished fringe, then clip to stitching line at quarter-inch intervals. In this case I wanted to fringe a denim applique to put on a child's sweatshirt. So after I embroidered the square, I stitched about 1/2" from the edge around 4 sides. After clipping, the applique was attached to the shirt following the stitching lines. After washing, the fabric "chips" away, leaving a fashionable soft fringed edge. This technique is especially useful when you are not sure the fabric is perfectly 'on-grain'. "Chipping" the fringe rather than raveling the edge assures the fringe depth will be straight and even! Posted by Hello